What is it?
Backing plate for disc brake pad

Why Fineblanked?
Fineblanking provides excellent flatness characteristics and fully sheared edges where required in the "ears".

What is it made of?
Low carbon steel, 0.230" (5.85mm) thick.

What is it?
Knife blade blank

Why Fineblanked?
Fineblanking provides excellent flatness characteristics and fully sheared edges. The excellent surface finish on the cut edges significantly reduces polishing cycle time.

What is it made of?
420 Stainless steel, 0.120" (3.05mm) thick.

What is it?
Large truck transmission ring.

Why Fineblanked?
Fineblanking was able to create this with all holes 13" (330mm) Ø part complete off-press, with all holes pierced in a single station die. Fineblanking provided a significant cost saving compared with machining.

What is it made of?
Low carbon steel, 0.350" (8.89mm) thick.

What is it?
Barrel bracket for a rifle.

Why Fineblanked?
Fineblanking can provide the very thin cross-section required. The fully sheared edges ensure tight dimensional accuracy of diameters and profile.

What is it made of?
410 Stainless steel and 4130 alloy steel, 0.246" (6.25mm) thick.

What is it?
Commercial lock component, hub.

Why Fineblanked?
Fineblanking provides all features right off-press. Square hole has cleanly sheared edges, required for tight fit of handle.

What is it made of? 1035 carbon steel, 0.230" (5.85mm) thick.

What is it?
Cradle

Why Fineblanked?
Fineblanking provides fully sheared edges, in functional areas. Form is created in-press. Holes of 0.197" (5mm)Ø are pierced in 0.250" (6.36mm) thick material.

What is it made of?
Low carbon steel.

What is it?
Crimping tool handle blanks.

Why Fineblanked?
Fineblanking provides excellent flatness, tight control of location of features, small radii on teeth in crimping area. Form is created in-press.

What is it made of?
1075 carbon steel, 0.187" (4.75mm) thick.

What is it?
Flange for automotive exhaust system.

Why Fineblanked?
Fineblanking provides excellent flatness and cleanly sheared pierced holes very close to part edge.

What is it made of?
Low carbon steel and stainless steel, 0.315" (8.0mm) thick.

What is it?
Ratchet blade blank for cable cutting tool.

Why Fineblanked?
Fineblanking provides fully sheared gear teeth, without need for secondary broaching. Center hole, 0.375" (9.53mm) 0, is pierced in 0.350" (8.89mm) thick material.

What is it made of?
8620 alloy steel, 0.350" (8.89mm) thick.